ATEX Immersion Heater ATEX Immersion Heater ATEX Immersion Heater ATEX Immersion Heater
Name:ATEX Immersion Heater
Type:Immersion heaters
Power Source:Electric
Dimension(LWH):Customizable
Weight:Final Dimension
Heating medium:Air,Water,Oil,Other liquid etc
Voltage:12V- 600V/Customizable
Certification:CE/ROHS/ATEX.
Tube Diameter:6mm to 30mm/Customizable
Tube Length:10mm to 6000mm/Customizable
Mgo Powder:99 Purity
Sheath Material:SUS304,316L,AISI321,Incoloy800,Copper & Titanium,Customizable
Diameter tolerance:+0.05mm -0.05mm (+.002
Wattage tolerance:±3
  • 产品介绍.png

    12.png

    Flange Immersion Heaters

    ● Flange heater (Immersion flange heater) with electrical connection wiring boxes . They feature high watt density for rapid heat transfer and are commonly used for heating gases & liquids such as water, oil, heat transfer fluid, and corrosive solutions.Due to high mechanical strength, high thermal efficiency, safe and pollution-free, flange heater is widely applicable to all kinds of saltpeter trough, sink, sump, acid and alkali tank, fusible metal melting furnace, air heating furnace, drying furnace, drying oven, hot die and other devices.


    ● Once the medium temperature reaches the set value required by the process, the control system adjusts the output  power of the electric heater through the PID/PLC control system according to the temperature sensor signal, and realizes real-time temperature control of the resistive load of the heating element. When the heating element is over-temperature or low liquid level, the automatic protection device of the heating element immediately cuts off the heater power to prevent the heating element from burning out, which can extend the service life.


    ● The design is based on customer process conditions: fluid to heat (type and properties), in/out temperature, pressure, heat exchange conditions (stagnant or flowing), and environment conditions (ATEX or not, onshore or offshore, etc.).


    ● A wide selection of thread/flange size, kilowatt ratings, voltages, sheath materials, terminal enclosures and thermostats makes these compact heaters ideal for all types of applications.


    产品参数.png


    Voltage

    110V ~ 600V AC Available

    Wattage

    1KW~1000KW/Customizable

    Immersion Length

    50mm-1000mm /Customizable

    Sheath Material

    SS304, 316L, 310S /T2 Copper/Incoloy800,840/Customizable

    Screw Thread size

    G / NPT / BSPP Thread 1'' 1 1/4'' 1 1/2'' 2'' /Customizable

    Round Flange size

    DN40/DN50DN80/DN120/DN150/DN200/Customizable

    Terminal Cover Material

    Stainless steel/Nylon /Plastic

    Resistance wire material

    Cr25Al5,Cr21Al6Nb,Cr27Al7Mo2,Cr20Ni80,GH140

    Wattage density

    (High/Middle/Low)1-25w/cm²

    Pipe diameter

    8mm,10mm,12mm,14mm,16mm,20mm/Customizable

    99_副本.jpg

    细节图片.png

    103_副本_副本.png

    图片1_副本_副本_副本.png

    35_副本_副本.png

    image.png

    image.png

    image.png

    image.png

    12.png

    image.png

    image.png

    X7.jpg 微信图片_20220225132133.jpg


    应用.png

    image.png

    image.png


    优势.png

    1. Low MOQ:   1-10 pcs MOQ available.

    2. OEM Accepted:  Strong capacity in develop and production under customer drawings.

    3. Good Service:   With good quality and pretty competitive price and excellent service.

    4. Good Quality:   CE; Rohs approved, With 6S quality control system. ATEX available.


    联系我们.png

    Hazel.png


    Hits: 【Print】